山东木工机械的框锯机构介绍-ag捕鱼平台

当前位置:捕鱼游戏主页 > 新闻资讯 >
product center
捕鱼娱乐平台的产品中心
联系捕鱼娱乐平台

济南骏捷数控设备有限公司

销售总机:师楠 18866899200

固定电话:0531—69989273

销售一部:师经理 13001727679

销售二部:谢经理 18766192210

地址:山东省济南市天桥区桑梓店镇绕城高速北200米海风产业园713号

新闻资讯
山东木工机械的框锯机构介绍
发布时间:2015-05-15 09:16:07     浏览次数:1359次

山东木工机械http://www.jndongjun.com/的框锯机构在木工机械行业占着重要的作用,大家对山东木工机械的框锯机构的了解有多少呢?
   
山东木工机械锯框机构是由箱体、锯梁、锯梁托、锯条,驱动器,齿轮传动机构,紧线机构连接组成。安装方便,切割锯口小,光滑平整,垂直度好,可提高木材使用率百分之二十。山东木工机械大驱动齿轮通过轴承安装在箱体的轴台上,并与小主动齿轮啮合传动;箱体固定架上开有紧线凹槽;箱体固定架通过螺钉安装框锯工作台;箱体通过上、下锯梁轴套安装锯梁,锯梁上端安装锯梁托及锯把柄。
shandong woodworking machinery saw frame bodies are connected by the cabinet, sawing beams, corbels saws, saw blades, drive, gear drive, tight line agencies. easy installation, cutting small kerf, smooth, good verticality, twenty percent can improve timber utilization. shandong woodworking machinery large drive gear mounted on the shaft through the bearing housing of the stage, and with the small driving gear meshing transmission; opened a tight line on the box holder recess; box holder by screw mounting frame saw table; box body through the upper and lower bushing installation saw saw liang liang, saw liang upper install corbels and saw saw handle.

山东木工机械http://www.jndongjun.com/箱体固定架的立架通过螺杆与木工机械的主工作台固定;在箱盖的端部设有箱盖固定孔,通过螺杆使箱体和箱盖连接固定;驱动器焊接在锯梁上,驱动器的内孔安装有轴承,轴承中安装的小轴固定在木大驱动齿轮上。
shandong woodworking machinery case holder stand frame fixed by screws and woodworking machinery main table; at the end of the lid is provided with cover fixing hole through the screw so that the connection box and the cover is fixed;drives the saw beam welding on the inner bore of the drive bearing is mounted, is installed in a small shaft bearings fixed to the wooden large drive gear.