济南木工机械发生故障有哪些原因?-ag捕鱼平台

当前位置:捕鱼游戏主页 > 新闻资讯 >
product center
捕鱼娱乐平台的产品中心
联系捕鱼娱乐平台

济南骏捷数控设备有限公司

销售总机:师楠 18866899200

固定电话:0531—69989273

销售一部:师经理 13001727679

销售二部:谢经理 18766192210

地址:山东省济南市天桥区桑梓店镇绕城高速北200米海风产业园713号

新闻资讯
济南木工机械发生故障有哪些原因?
发布时间:2015-05-15 09:16:16     浏览次数:1550次

随着使用年限的增长,济南木工机械http://www.jndongjun.com/可能会发生故障,给大家造成一定的困扰。下面济南东骏木工机械的专家给大家分析一下济南木工机械发生故障有哪些原因?
   
1、济南木工机械转速高,加上被加工的木质不均,切削过程中噪音大,振动大,工人劳动强度大,易疲劳,这些因素都是容易使操作者产生失误而造成伤害。
jinan woodworking machinery, high speed, coupled with uneven wood being processed, large cutting process noise, vibration, high labor intensity, fatigue, these factors are likely to enable the operator to generate errors and cause injury.
   
2、济南木工机械多采用手工送料,这是潜伏着伤手的原因,当手推压木料送进时,由于遇到节疤,弯曲或其它缺陷,不自觉地发生手与刃口接触而造成伤害。
jinan woodworking machinery more use of hand-feeding, it is reason lurking hand injury, when pressed wood hand feeding, since the encounter knots, bending or other defects, and damage is occurring unconsciously touching the edge.
   
3、济南木工机械http://www.jndongjun.com/的工作刀轴转速很高,转动惯性大,难于制动。操作者为了使其在电机停止后尽快停转,往往习惯用手或木棒去制动,常因不慎使手与转动的刀具相接触而造成伤害。
jinan woodworking machinery work high knife shaft speed rotating inertia, difficult to brake. the operator in order to make it as soon as possible after the motor has stopped stopped, often customary hand or stick to brake, often

inadvertently make hand contact with the rotating tool and cause injury.
   
4、操作者不熟悉济南木工机械性能和安全操作技术,或不按照安全操作规程作业,加之济南木工机械没有安装安全防护装置或安全防护装置失灵,都极易造成伤害事故。
the operator is not familiar with the jinan woodworking machinery performance and safe operation techniques, or not in accordance with safety procedures work, combined woodworking machinery jinan no security guards or security guards failed to install, are very vulnerable to injury.