全自动封边机涂胶不均匀如何处理?-ag捕鱼平台

当前位置:捕鱼游戏主页 > 新闻资讯 >
product center
捕鱼娱乐平台的产品中心
联系捕鱼娱乐平台

济南骏捷数控设备有限公司

销售总机:师楠 18866899200

固定电话:0531—69989273

销售一部:师经理 13001727679

销售二部:谢经理 18766192210

地址:山东省济南市天桥区桑梓店镇绕城高速北200米海风产业园713号

新闻资讯
全自动封边机涂胶不均匀如何处理?
发布时间:2015-05-23 16:23:34     浏览次数:1745次

全自动封边机http://jndongjun.com/在家具封边的工作过程中有时候会碰到封边机涂胶不均匀的情况,那么这时候应该如何处理呢?

1、首先把全自动封边机的涂胶调大试试(针对门斜角大),如果不行再打开胶盒盖子看看胶是或否已经化好,如果胶太粘稠请温度调高,如温度已经调至所用胶最高数值那就是胶质量差,请更换别的品牌胶使用。
first, try to transfer large automatic edge gluing machines (for door bevel big), if not then open the plastic cover or whether the child has a look of glue is good, if the glue is too thick, please temperature increase, such as

temperature has been raised to the highest value use plastic glue that is poor quality, replace the use of other brands of plastic.

2、如果全自动封边机http://jndongjun.com/胶不粘稠,再看看板材是否压紧,如板材已经压紧,板材后半部仍然没胶,可以调胶盒尾部防护罩内部的胶盒顶丝(无弹簧),松内六角螺丝杆(不要调太多,根据需要松0.5—1.5圈)。
if the automatic edge banding machine glue is not sticky, and then look at whether the clamping plate, such as plate has been pressed plate after half still did not gel, you can adjust the rear hood plastic boxes plastic boxes inside the top wire (no spring) , hexagonal screw rod (not adjusted too much, according to need loose circle 0.5-1.5) of pine.