山东木工机械裁板蹦边是怎么回事？-ag捕鱼平台

1、如果山东木工机械http://www.jndongjun.com/是上面崩边，说明大锯片不锋利了，下面崩边说明小锯片不锋利了，只需要用专业磨锯机磨一下即可。
if shandong woodworking machinery is chipping above described large blade is not sharp, and the following description of a small chipping blade is not sharp, and just use a professional mill saw mill click.
　　
2、如果山东木工机械大小锯片用的不是一个品牌的，需要把小锯片左右调整到大锯片锯路中，小锯片升起高度不宜过高，因为小锯片是t平齿形，升起高度最好和大锯片锯路吻合为宜。
if the size of the blade with shandong woodworking machinery is not a brand, about the need to adjust to large blade small saw blade path, raising the height of the blade should not be too small, because of the small toothed saw blade is flat t, l from the height of the best fit and the large blade kerf is appropriate.
　　
3、如果山东木工机械http://www.jndongjun.com/裁板锯是胶木导轨或是直线导轨的，使用时间过长后，需要进行维修保养。胶木导轨如果胶木块磨损，会出现锯不直或崩边，直线导轨需检查钢条是否开胶，如果开胶，重新粘合即可。
if shandong woodworking machinery bakelite panel saw is linear guide rail or prolonged use, the need for maintenance. if you wear rubber wood bakelite guide, there will be no sawing or chipping straight, linear guides need to check the steel strip is plastic, if a plastic, re-bonding can be.