二手封边机有哪些封边技巧?-ag捕鱼平台

当前位置:捕鱼游戏主页 > 新闻资讯 >
product center
捕鱼娱乐平台的产品中心
联系捕鱼娱乐平台

济南骏捷数控设备有限公司

销售总机:师楠 18866899200

固定电话:0531—69989273

销售一部:师经理 13001727679

销售二部:谢经理 18766192210

地址:山东省济南市天桥区桑梓店镇绕城高速北200米海风产业园713号

新闻资讯
二手封边机有哪些封边技巧?
发布时间:2015-05-30 11:17:43     浏览次数:1194次

二手封边机http://www.jndongjun.com/封边最关键的是板材边要平直,不要存在推台锯大小锯片错位所产生的台阶,要压帖紧密,否则容易产生封边与板边存在缝隙,手工封边时最好采用手工封边专用胶水,不建议使用万能胶,遇热容易脱落。
used banding machine edge is the most critical sheet edge must be straight, not to the presence of stairs table saw blade dislocation arising from size, to press close quote, or prone to edge and board edge gaps exist, when hand-edge the best use of hand-edge special glue, does not recommend the use of all-purpose adhesive, heat easily.
 
二手封边机不起封边带,应该排除机械故障,检查滑道是不是正常、气缸工作是不是正常,如果都没问题那就再需要检查位置传感器、电磁阀、中间继电器等工作状态是不是正常,如果齐头有在动作中但速度跟不上应当着重检查机械部分。
used afford edge banding machine with, should rule out mechanical failure, check the slide is not normal, the cylinder is not working properly, then it would not be a problem if you need to check the position sensors, solenoid valves,relays and other working conditions are not normal, if qi head, but could not keep pace in the action should focus on checking the mechanical parts.
  
二手封边机http://www.jndongjun.com/如果是一点动作都没有的话,那大多就是电气部分的原因,寻找原因必须要细心耐心,加热指示灯不亮一般有两种情况,温度设定值低于实际温度、温度控制仪故障了。
used edge machine is that if action is not, that's why most of the electrical part of the reason must be careful to find the patience, the heating light does not shine there are two cases, the temperature setpoint lower than the actual temperature, temperature controller broken down.