全自动封边机切割机锯片如何选择?-ag捕鱼平台

当前位置:捕鱼游戏主页 > 新闻资讯 >
product center
捕鱼娱乐平台的产品中心
联系捕鱼娱乐平台

济南骏捷数控设备有限公司

销售总机:师楠 18866899200

固定电话:0531—69989273

销售一部:师经理 13001727679

销售二部:谢经理 18766192210

地址:山东省济南市天桥区桑梓店镇绕城高速北200米海风产业园713号

新闻资讯
全自动封边机切割机锯片如何选择?
发布时间:2015-05-31 18:36:01     浏览次数:1320次

全自动封边机http://www.jndongjun.com/切割机上的锯片对设备的使用有着非常重要的作用,其需要也是非常的严格,因为切割量大,精度要求高,因此我们在进行选择铝型材切割机锯片时,需要注意一下事项。

1、全自动封边机切割机锯片材质一般采用硬质合金,好的设备一般采用碳化钨合金钢,在相同厚度情况下,刀片直径的大小决定切割的产量,直径小产量低,反之直径大、产量高,锯片的外径根据不同的圆锯机机型选择使用直径相符的锯片。
automatic edge banding machine cutter blade material is generally used carbide, tungsten carbide steel good equipment commonly used in the same thickness, the size of the cutting blade diameter determines yield, small diameter low yield, whereas the diameter, high yield, the outer diameter of the blade selection matches the diameter of the circular saw blade according to the different machine models.

2、全自动封边机切割机齿数一般齿数越多,在单位时间内切削的刃口越多,切削性能越好,但切削齿数多需用硬质合金数量多,锯片的价格就高,但锯齿过密,齿间的容屑量变小,容易引起锯片发热;另外锯齿过多,当进给量配合不当的话,每齿的削量很少,会加剧刃口与工件的磨擦,影响刀刃的使用寿命,通常齿间距在15-25mm,应根据锯切的材料选择合理的齿数。
automatic edge banding machine cutter teeth are generally more teeth, more time in the unit cutting edge, cutting the better, but much carbide cutting teeth more than the number required, saw the price will be high, but the sawtooth too close, the teeth of the chip becomes smaller, easily lead to heat the blade; another too jagged, when the feed rate mismatch, then cut per tooth is small, will exacerbate friction with the workpiece edge, the impact of the blade life,usually tooth pitch 15-25mm, should be selected in accordance with a reasonable number of teeth cutting material.

3、全自动封边机http://www.jndongjun.com/切割机锯片的厚度从理论上我们希望锯片越薄越好,锯缝实际上是一种消耗。合金锯片基体的材料和制造锯片的工艺决定了锯片的厚度,厚度过薄锯片工作时容易晃动,影响切削的效果,选择锯片厚度时应从锯片工作的稳定性以及锯切的材料去考虑。
thickness automatic edge banding machine blade cutter blades theoretically we hope the thinner the better, it is actually a kerf consumption. materials and manufacturing processes saw blade alloy matrix determines the thickness of the blade, easily shaken too thin blade work, the impact of the effect of cutting, the blade thickness of the blade should be chosen to work from the stability and sawing materials to be considered.