济南木工机械使用安全常识有哪些?-ag捕鱼平台

当前位置:捕鱼游戏主页 > 新闻资讯 >
product center
捕鱼娱乐平台的产品中心
联系捕鱼娱乐平台

济南骏捷数控设备有限公司

销售总机:师楠 18866899200

固定电话:0531—69989273

销售一部:师经理 13001727679

销售二部:谢经理 18766192210

地址:山东省济南市天桥区桑梓店镇绕城高速北200米海风产业园713号

新闻资讯
济南木工机械使用安全常识有哪些?
发布时间:2015-11-10 15:36:24     浏览次数:1079次

1.凡使用有毒的、刺激性的以及易燃物质的工艺过程应放在单独的济南木工机械 http://www.jndongjun.com/厂房中,或安排在厂房内专门隔出的地段上,并配备个人防护用品和消防器材。
1.where the use of toxic, irritating, and flammable substances in the process should be placed in a separate ji'nan woodworking machinery factory, or arranged in a special section of the plant, and equipped with personal protective equipment and fire equipment.

2.济南木工机械车间里运送原木、锯材、废料的通道应设且消除穿堂风的设施如走廊、门厅、门帘、帘幕等以及防止火灾蔓延的设施如自动防火门、防火防烟挡板、水幕等。
2.jinan woodworking machinery in the workshop transport logs, sawn timber, waste of channel should be set and eliminate drafts of facilities such as corridor, hall, curtain, curtains, etc and to prevent the spread of the fire facilities such as automatic fire doors, fire anti smoke baffle plate, a water curtain etc..

3.在济南木工机械车间内需要安全地到达设备上方的工作岗位时,应安装带防护栏杆和楼梯的天桥。厂房地面和天桥通道应敷设防滑地面。
in ji'nan woodworking machinery workshop need to be safe to reach the top of the device, should be installed with protective railings and stairs of the bridge. the ground and bridge of the workshop should be laid on the ground of non slip surface.

4.常用的人行通道上不应有设备和什线.其宽度不小于1m.
4.there is no equipment or even line on the common line channel. its width is not less than 1m.

5.地面以下的传送带要用盖板或姗格状防护板齐地盖上。金属板表面应防滑。栅格防护的缝隙宽度不超过30mm.
5.send the below ground to cover with qi with cover or shan lattice on the protection board. metal plate surface should be non slip. grid protection of the gap width is not more than 30mm.

6.济南木工机械工作时产生的锯末和废料贮槽应安放在厂房外。
6.sawdust produced ji'nan woodworking machinery work and waste storage tank should be placed in the workshop.