操作济南木工机械需要注意一下事项!-ag捕鱼平台

当前位置:捕鱼游戏主页 > 新闻资讯 >
product center
捕鱼娱乐平台的产品中心
联系捕鱼娱乐平台

济南骏捷数控设备有限公司

销售总机:师楠 18866899200

固定电话:0531—69989273

销售一部:师经理 13001727679

销售二部:谢经理 18766192210

地址:山东省济南市天桥区桑梓店镇绕城高速北200米海风产业园713号

新闻资讯
操作济南木工机械需要注意一下事项!
发布时间:2016-07-16 09:36:17     浏览次数:1486次

1.济南木工机械 http://www.jndongjun.com/操作人员应经过培训,了解机械设备的构造、性能和用途,掌握有关使用、维修、保养的安全技术知识。电路故障必须由专业电工排除。
1.ji'nan woodworking machinery operators should be trained to understand the structure, performance and use of mechanical equipment, master the use of the use, maintenance, maintenance of security technology knowledge. circuit fault must be excluded by professional electrician.

2.作业前试机,各部件运转正常后方可作业。开机前必须将机械周围及脚下作业区的杂物清理干净,必要时应在作业区铺垫板。
2.work before the test machine, the operation of the normal operation of the parts before the operation. before starting the machine must be around and at the foot of the operating area of debris clean up, if necessary, should be in the operating area bedding.

3.作业时必须扎紧袖口、理好衣角、扣好衣扣,不得戴手套。作业人员长发不得外露。女工应戴工作帽。
3.the operation must tie cuffs, good clothes, buttoned up, not wearing gloves. operators long hair may not be exposed. women workers should wear a working hat.

4.机械运转过程中出现故障时,必须立即停机、切断电源。
4.in the process of mechanical operation, it is necessary to stop and cut off the power supply immediately.

5.链条、齿轮和皮带等传动部分,必须安装防护罩或防护板。
5.the transmission part of the chain, the gear and the belt must be fitted with a shield or shield.

6.必须使用单向开关,严禁使用倒顺开关。
6.must use a one-way switch, the use of reverse switch is strictly prohibited.

7.济南木工机械 http://www.jndongjun.com/工作场所严禁烟火,必须按规定配备消防器材。
7.ji'nan woodworking machinery working place is strictly prohibited fireworks, must be equipped with fire equipment.

8.应及时清理机器台面上的刨花、木屑。严禁直接用手清理。刨花、木屑应存放到指定地点。
8.the machine should be cleaned the table of wood shavings and sawdust in a timely manner. direct hand cleaning is prohibited. wood shavings and sawdust should be stored to the designated location.

9.济南木工机械作业后必须切断电源,闸箱门锁好。
9.ji'nan woodworking machinery must be cut off after the operation of power supply, lock box door lock.